BC548 Pinout

Introduction to BC548 26

[otw_is sidebar=otw-sidebar-1]BC548 Pinout

I hope you all are good, in the previous tutorial I have discussed about datasheet overview of the BC548 transistor. In this tutorial I will discuss the overview of the datasheet of the BC548 transistor.

After reading this tutorial the reader will be able to learn about the pinout of the BC548 transistor, basic description of BC548 transistor, nominal electrical characteristics of the BC548 transistor and the general circuits in which this transistor can employed.

So sit back, keep reading and enjoy learning!



BC548 Pinout:

The pinout of the BC548 Transistor is as shown in the following figure:

BC548 Pinout

The symbol of the BC548 transistor is also represented in the above figure. It is important to notice here that while pointing out the leads of the transistor the flat face of the transistor should be facing. This applies for all transistors.

BC548 Basic Description:

BC548 is a general purpose transistor and mainly employed for switching and AF (audio frequency) amplifier applications. The BC548 transistor gets on when the Base-Emitter Voltage exceeds 0.55 volts. The Transfer characteristics of the transistor is defined as the relation between the input and output voltage.

[otw_is sidebar=otw-sidebar-3]

BC 548 Transistor Type:     

  • Bi-Polar NPN

BC548 Absolute Maximum Rating at Room Temperature:

  • Maximum Collector current (Ic) :                         100 mA
  • Maximum Base-Emitter Voltage (Vbe) :             5 Volts.
  • Maximum Collector-Emitter Voltage (Vce):            30 Volts.
  • Maximum Collector-Base Voltage (Vcb): 30 Volts.

The tentative representation of the electrical characteristics of the BC548 transistor is as shown in the following image.

electrical characteristics of the BC548 transistor

BC548 Circuits:

[otw_is sidebar=otw-sidebar-3]

  • BC548 can be employed in H- Bridge cirucits.
  • BC548 can also be employed in current mirror circuits.
  • BC548 finds applications in linear amplifiers.
  • BC548 is also used for impedance buffering.
  • BC548 can be deployed for switching applications.
  • BC548 can be used for designing Bistable multivibrators.
  • BC548 can be employed for Astable vibrator.
  • BC548 finds application in oscillator circuits.
  • BC548 transistor is also used in comparator circuits.

That is all for now, I hope this tutorial would be helpful for you. In the next tutorial I will discuss another transistor. Till then stay connected, keep reading and enjoy learning.

Leave a Reply

Your email address will not be published. Required fields are marked *