Remote Control Traffic Lights in proteus simulation

Remote Control Traffic Lights in proteus simulation

In this article we will learn how to make Remote Control Traffic Lights in proteus.
In the last post we will learn how to Interface 74259 Easy HDL Model circuit in proteus. You can visit our website,
I hope you appreciate my work, let’s discuss about today’s project.

Components which we use in this project are listed below:

1. Arduino UNO
2. Remote control
3. Resistors
4. Push button
5. LED
6. Traffic lights
7. Jumper wires

Diagram of this project is below:

Construction of Remote Control Traffic Lights in proteus simulation

• Connect RED traffic light with D5
• Connect Yellow traffic light with D6
• Connect Green traffic light with D7
• Connect one side of Push button with –ve side of LED and then connect them with GND
• Connect 2^nd side of push button with RESET pin through one side of resistor
• Connect 2^nd side of resistor with 5v
• Connect 2^nd side of LED with one side of 2^nd resistor
• Connect 2^nd side of 2^nd resistor with D13
• Connect AVCC and UVCC pin together and then connect with 5v
• Connect CAP pin of Arduino with one side of capacitor
• Connect 2^nd side of capacitor with GND
• Connect BUS pin and GND pin of Arduino with each other and then connect with GND
• Connect HWB pin of Arduino with one side of resistor
• Connect 2^nd side of resistor with GND

More electronics Projects

hare is the more interesting projects list below

1. rain sensor library for proteus download 
2. Touch sensor simple Electronic circuit
3. Rain Alarm Circuit
4. Remote Control Traffic Lights in proteus simulation

Working of Remote Control Traffic Lights in proteus simulation

Remote control traffic lights, also known as traffic signal control systems, are designed to manage and control the flow of vehicular and pedestrian traffic at intersections and other critical points on roadways. These systems typically consist of various components and technologies that work together to ensure efficient traffic management

Applications of Remote Control Traffic Lights in proteus simulation

1. Traffic Management
2. Congestion Reduction
3. Pedestrian Safety
4. Environmental Benefits
5. Emergency Response

Advantages of Remote Control Traffic Lights in proteus simulation

1. Real-time Traffic Management
2. Adaptive Traffic Signal Timing
3. Emergency Response
4. Traffic Data Collection
5. Reduced Energy Consumption