Raspberry Pi interfacing with GPs module project

Raspberry Pi interfacing with GPs module project

In this article we will learn how to make Raspberry Pi interfacing with GPs module project.

In the last post we will learn how to make LED Blinking using Raspberry Pi project. You can visit our website,
I hope you appreciate my work, let’s discuss about today’s project.

 

 

 

Components:

1. Raspberry Pi (Pi 3)
2. GPS module
3. Resistor (330, 1k)
4. Led (RED, Green)
5. Buzzer
6. Push button
7. Jumper wires

Construction…

• Connect TX pin of GPS module with RXD pin of Raspberry Pi
• Connect RX pin of GPS module with TXD pin of Raspberry Pi
• Connect –ve side of Led 1 with GND
• Connect +ve side of Led 1 with one side of Resistor 330
• Connect 2^nd side of 330 with GPIO 18 pin of Raspberry Pi
• Connect –ve side of Led 2 with GND
• Connect +ve side of Led 2 with one side of Resistor 330
• Connect 2^nd side of 330 with GPIO 19 pin of Raspberry Pi
• Connect one side of resistor 1k with GND
• Connect 2^nd side of resistor 1k with GPIO 4 pin of Raspberry Pi through one terminal of Push button
• Connect 2^nd side of push button with +ve
• Connect one side of Buzzer with GND
• Connect 2^nd side of buzzer with GPIO 6 pin of Raspberry Pi

Working…

Interfacing a Raspberry Pi with a GPS (Global Positioning System) module involves connecting the GPS module to the Raspberry Pi and using software to communicate with and parse the data from the GPS module.

Applications…

1. Navigation Systems
2. Vehicle Tracking
3. Location-based Services
4. Weather Balloons and High-Altitude Projects
5. Wildlife Tracking

Advantages…

1. Location-based Services
2. IoT Applications
3. Asset Tracking
4. Outdoor and Adventure Projects
5. Automotive Applications