I am Kashif Mirza, the founder of
ProjectIOT123. I am an Embedded Engineer and working on Embedded Projects since 2003. I have worked on Arduino, Raspberry Pi, PIc Microcontroller, 8051 etc. and have designed both prototypes & industrial projects.
In this article we will discus what is diode Types of diode Application of diode. In today’s article we are going to tell about a component of electronics Which is called diode. what is diode Diode is a device that allows current to flow one side It has two legs One is cathod and one is called…
In this article I will discuss one of the most important electronic components i.e. Zener Diode. At the end of this article you will be able to learn about. What is the Zener Diode? V-I characteristics of Zener Diode? Construction and Working of Zener Diode? Applications of Zener Diode? zener diode as voltage regulator So…
In this article I will discuss about the installation of the operating system in the Raspberry Pi and about how to program the Raspberry Pi.In the previous article I have presented the board overview and pin out of the Raspberry Pi3. For this tutorial you will need the following things. Setting up the Raspberry…
In this article I will let you go through the basics of Raspberry pi and the general overview of the setup required to run a Raspberry pi. After reading this article you will learn about the Raspberry pi hardware i.e. about its GPIO pins, several communication ports available on board, power supply rating for the…
Welcome to WordPress. This is your first post. Edit or delete it, then start writing!