Telecommunication Engineering

Telecommunication Engineering

[otw_is sidebar=otw-sidebar-1]I hope you all are fine and doing well in life. I have been asked frequently by the students about different fields of engineering, about which is better than the other and which pays you more and what do we study in that field and what...
Embedded System Engineering

Embedded System Engineering

[otw_is sidebar=otw-sidebar-1]This is the fourth article (Embedded System Engineering)in the series of engineering disciplines that I had started to address the frequently asked questions by young engineers and undergraduates. In this article I will discuss about the...
Relay Module Simulation in Proteus

Relay Module Simulation in Proteus

In this post I will discuss about the Relay module simulation model in Proteus and its simulation along with the Arduino in Proteus. In the previous posts I have discussed the simulation of important sensors in Proteus and this post will be oriented around Relay...
what is relay

what is relay

[otw_is sidebar=otw-sidebar-1]In this post I will discuss about the Basics of relay and Types of Relay. In the previous posts I have discussed the simulation of important sensors in Proteus and this post will be oriented around Relay Module simulation in Proteus....

What if life?

*What is LIFE*? To understand life better, you have to go to 3 locations: *1. Hospital* *2. Prison* *3. Cemetery* At the *Hospital*, you will understand that nothing is more beautiful than HEALTH. In the *Prison*, you’ll see that FREEDOM is the most precious...
8 bit lcd interfacing with 8051

8 bit lcd interfacing with 8051

[otw_is sidebar=otw-sidebar-1]lcd interfacing is very important topic for embedded developers. So it is very important to know how to interface the LCD 16×2 with 8051. In today’s post we are going to demonstrate interfacing LCD with 8051 microcontroller...

science projects for beginners

  In this post I will discuss about the science projects for beginners. In the previous posts I have discussed about the Bluetooth module simulation in Proteus and also have discussed important sensors and actuators in Proteus. This post will be oriented around...
Copper Shapes in orcad pcb editor tutorial

Copper Shapes in orcad pcb editor tutorial

[otw_is sidebar=otw-sidebar-1]I hope you all are good; this is the eighth part of the series of tutorials on “Introduction to Allegro PCB Designer”. Allegro PCB Designer is an important software for designing the layout of the printed circuit boards (PCBs) used at the...
Introduction Vias and GND Plane PCB

Introduction Vias and GND Plane PCB

[otw_is sidebar=otw-sidebar-1]I hope you all good, this is the ninth part in series of tutorials on “Introduction to Allegro PCB Designer”. In the previous tutorial I have discussed about the basic commands used frequently for designing layout at beginners’ level. I...
BC557  PNP Transistor

BC557 PNP Transistor

[otw_is sidebar=otw-sidebar-1][otw_is sidebar=otw-sidebar-2] I hope you all are good, in the previous tutorial I have discussed about datasheet overview of the BC557 transistor. In this tutorial I will discuss the overview of the datasheet of the BC557 transistor....