Original ATMEGA328 28 Pin Microcontroller.
Description
Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller is a high-performance, low-power controller from a microchip. Atmel ATMEGA328P Arduino is like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with an external crystal. The package can be Arduino programmed in a circuit. 1.8V to 5V operating voltage. Atmega328p programming controller is an 8-bit microcontroller based on AVR RISC architecture. Atmega-328p ic chip is the most popular of all AVR controllers as it is used in ARDUINO boards.
Features of Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller 28-DIP Atmega-328P Arduino Programming Controller IC Chip Micro Chip:
- Practically does the work for you, durable and useful.
- Good reliability and lifelong lasting time are useful and durable.
- Only an ATmega328 in the DIP package, without the optiboot bootloader pre-loaded.
- You have to use code in your custom embedded project.
- It’s like the ATmega168, with double the flash space.
- 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC.
- Runs up to 20MHz with an external crystal.
- The package can be programmed in a circuit. 1.8V to 5V operating voltage!
- To get this chip working with IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection.
Specifications of Atmel 8 Bit 28 Pins Microcontroller ATMEGA328P Microchip:
-
4.5V-5.5V operating range
-
Up to 20MHz
-
Part: ATMEGA328P-AU
-
32kB Flash program memory
-
1kB EEPROM
-
2kB Internal SRAM
-
Two8-bit Timer/Counters
-
One16-bit Timer/Counter
-
RTC with separate oscillator
-
6 PWM Channels
-
8 Channel 10-bit ADC
-
Serial USART
-
Master/Slave SPI interface
-
2-wire (I2C) interface
-
Watchdog timer
-
Analog comparator
-
23 IO lines
-
Data retention: 20 years at 85oC/ 100 years at 25oC
Package Includes:
- 1 x Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller IC Chip