Timer circuit using PIC microcontroller
In this article we will learn how to make Timer circuit using Pig microcontroller.
In the last post we will learn how to interface arduino with DC voltmeter and digital display. You can visit our website,
I hope you appreciate my work, let’s discuss about today’s project.
Components which we use in this project are listed below:
- Timer PCB
- 16 pin base
- 14 pin base
- Push button (3)
- 100 Uf
- 1000 Uf
- 7805 regulator
- A 1015 transistor
- Diod 4007
- Capacitor 104 pf
- Diod 4148
- Resistor 1K
- Jumpers
- 7 segment 4 digit display
- Resistor 10K
- Connecting wires
Image of this project is below
Construction of Timer circuit using PIC microcontroller:
- Place step down transformer along diod base bridge rectifier convert 220V into 12V
- Place capacitor for filter circuit
- Place pig microcontroller and 7805 regulator for 5V power supply
- Interface microcontroller with shift resistor IC (4094) serial in parallel out
- 4 transistor (1015) used as a amplifier
- Common anode 4 digit display
Working of Timer circuit using PIC microcontroller
- When we push set button then set on time option is display
- Then we set the on time value by using up and down button’s
- Again push the set button then off time option is display
- Then we set the off time value by using up and down button’s
- Now press the set button again to set these value’s
- Now press down button to start the circuit. After press the down button timer is start and relay is on and On-time and off-time is displaying on digital display.
Applications of Timer circuit using PIC microcontroller
- Ultrasonic Distance Measurement
- Real-Time Clock
- Timing and Delays
- Pulse Width Modulation
Advantages of Timer circuit using PIC microcontroller
- Precision Timing
- Automation
- Reduced Processor Load
- Energy Efficiency
- Interrupt Generation