ir2110 circuit in proteus 1

ir2110 circuit in proteus

ir2110 proteus library

In this article we will learn how to make Ir2110 circuit in proteus.

You can visit our website,
I hope you appreciate my work, let’s discuss about today’s project.

[otw_is sidebar=otw-sidebar-3]

 

 

Table of Content:

1.    Components 2.    About main components 3.    Amazon Links 4.    How Ir-2110 works 5.    Circuit Connection 6.    Applications 7.    Programming Code

 

Components: 

1. IC (Ir-2110)
2. Arduino Uno or any other micro controller
3. Resistors
4. Capacitors
5. Fast recovery diode
6. Mosfet or IGBT
7. Power Supply
8. Jumper wires

About main component

Let’s discuss about our main/important component.

In this Article our main Component is Ir-2110, so let’s discuss about it.

IC (Ir-2110)

The IR2110 is a high- and low-side driver IC used in applications like driving MOSFETs and IGBTs in half-bridge and full-bridge configurations. It’s commonly used in motor control, power inverters, and other power electronics applications.

Amazon Links: 

Arduino Nano

Arduino UNO

IR2110 sensor

How Ir-2110 works

Here’s a basic breakdown of how the IR2110 works:

 

Input Signals:

It typically takes two input signals, one for the high-side and one for the low-side. These inputs are often square waves that are 180 degrees out of phase to control the switching of the high-side and low-side power switches.

Internal Architecture:

Inside the IR2110, there are level shift and buffer stages. These help to convert the low-voltage input signals (usually coming from a microcontroller or similar) to high-voltage, high-current signals required to drive the power switches.

Output Stage:

The IC has two outputs, one for the high-side and one for the low-side. These outputs can deliver substantial current to turn the MOSFETs or IGBTs on and off quickly.

 

Bootstrap Circuitry:

The high-side gate driver in the IR2110 often uses a bootstrap capacitor to generate a voltage higher than the power supply voltage to properly drive the high-side switch. This is necessary because the high-side switch might be floating with respect to ground.

Protection Features:

The IR2110 may have built-in protection features to prevent shoot-through currents which could potentially damage the circuit.

Isolation:

Some applications require isolation between the control circuit and the power stage. In such cases, external otocouplers or other isolation techniques might be employed along with the IR-2110.

External Components:

External components like resistors, capacitors, and diodes are often used to set up the circuit and provide necessary functionality.

Overall, the IR-2110 simplifies the process of driving high-power switches by handling the complex tasks of driving them with appropriate voltage and current levels, allowing for efficient and controlled switching operations in various power electronics applications.

ir2110 arduino code

 

ir2110 h bridge circuit

here is the simple motor contrrol circuit using H Bridge and ir2110 ic

[otw_is sidebar=otw-sidebar-2]

 

Simulation of three phase cascaded H-Bridge Multilevel Inverter

 

you can download from this proteus simulation

[otw_is sidebar=otw-sidebar-1]

arduino projects for beginners | Arduino Programming in Urdu/hidi

 

 

arduino projects for beginners | Arduino Programming in Urdu/hidi